- Product Types
-
- Fully cured
- Flame retardant
- Partially cured
- SEBS type
Polyethylene is a light and flexible thermoplastic which is widely used in our daily lives. Its uses can range from our daily necessities to industrial materials. It is widely used in producing bottles, packagings, and electrical insulators.
PLASMER
PLASMER is a ThermoPlastic Elastomer (TPV) produced by dynamic vulcanization of PP and EPDM that can replace PVC or rubber. It is an eco-friendly material that can be recycled.
Product Grade- Product Usage
-
- Bellows, Glass Run Channel etc.
- Hoses, plugs, gaskets etc.
- Pipe gaskets and seals etc.
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
POLYLINK
POLYLINK is a cross-linked polyethylene created by a SILANE cross-linking process. It has excellent resistance to heat and water pressure along with high impact strength
Product Grade- Product Types
-
- Graftmer
- Catalyst M/B
- Product Usage
-
- Heating/water supply/drinking water pipes
- Aluminum composite pipes
- Wire sheaths for low & middle voltagewires and electrical insulators
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
i-LUX
i-LUX is a MATT material used in hollow molding and film molding processes. Through controlling the light penetration, i-LUX develops luxurious and soft characteristics of the film.
Product Grade- Product Types
-
- For BOPP
- For IPP
- For blown films
- For blow moldings
- Product Usage
-
- Food wrapping film
- Coating for book covers
- Cases for cosmetics and other various usages
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
POLYGLUE
POLYGLUE is an adhesive resin that grants polarity to non-polar material such as Polyolefin (PE/PP) materials, enabling it to bond strongly to polar materials such as metal (Steel, Aluminum, Coppet etc.), polar polymers(EVOH, Nylon etc.) and wood etc.
Product Grade- Product Types
-
- PE Type
- PP Type
- EVA Type
- Product Usage
-
- Steel pipe coating adhesive
- AL Composite pipe / Panel adhesive
- Multi-layer film / Sheet adhesive
- Multi-layer blow molding bottle adhesive
- Automotive headliner adhesive
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
India- TEL : +91 8433236658
- E-mail : mohit@hyundai-ep.inSend Email
TOP COAT
TOP COAT is a steel pipe coating resin that is used along with adhesive resin. It has a triple coating system that includes an anti-corrosion function.
Product Grade- product Types
-
- PE Type
- PP Type
- Product Usage
-
- Steel pipe coating adhesive
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
India- TEL : +91 8433236658
- E-mail : mohit@hyundai-ep.inSend Email
NOTRAN
NOTRAN is a material that has excellent barrier properties against solvents and oxygen. NOTRAN containers can be produced through a blow molding process and can minimize losses by evaporation.
Product Grade- product Types
-
- Nylon Based
- EVOH Based
- Product Usage
-
- Vessels for storing various organic solvents such as pesticides, paints etc
- Containers for storing assorted food such as mayonnaise, ketchup etc.
- Contact
-
Korea
- TEL : +82-31-785-2811
- E-mail : seanlee@hdc-hyundaiep.com Send Email
